office (713) 849-3366
fax (713) 849-3654
toll-free (800) SAY-AAAT

Contoured Cast Iron Pipe Roller

FIG 806

APPLICATION:  A Fig. 806 Cast Iron Pipe Roller is the roller unit in our Fig. 809, 812, 815 and 821 Roller Hanger/Chair units.  It can also be used to replace damaged roll units in existing installations as well as being incorporated in custom field fabricated pipe rolls.
CONSTRUCTION:  The Fig. 806 Pipe Roller is constructed of Cast Iron. The contoured portion of the pipe roller is intended to fit the outside diameter of the pipe diameters shown in the tables given below.
NOTE:  Use size selection chart for assistance in determining the appropriate pipe roll for your application.  Note that different sizes are used for the same resultant outside pipe diameter depending upon the type or style of hanger or chair unit you have selected.
FINISHES AVAILABLE:  Black, Hot Dip Galvanized, Electro-Plated or Painted.
ORDERING:  Specify figure number, nominal pipe diameter, name and finish, if other than black.
EXAMPLE:  Fig. 806, Nom. Pipe Dia. 10, Cast Iron Pipe Roll, galvanized

pipe roller chart pipe roller cast iron

Hardware Main


insulation shield ribbed insulation shield iron pipe roller
FIG 800 FIG 803 FIG 806
clevis roller hanger rod roller hanger support roller
FIG 809 FIG 812 FIG 815
adjustable roller pipe roller chair iron pipe roll
FIG 818 FIG 821 FIG 824
pipe roller and stand adj pipe roller stand lg pipe roller stand
FIG 827 FIG 830 FIG 833
pipe protection saddle    
FIG 842-57