office (713) 849-3366
fax (713) 849-3654
toll-free (800) SAY-AAAT

Vibration Control Sway Brace

Adjustable Preload Assembly E370

sway brace assembly E370 This sway brace consist of a rear bracket, a male rod extension piece with an adjustable nut, a lock nut, a sway brace unit, a connector rod with a thrust nut, a lock nut and rod coupling, a male rod extension piece with a lock nut and a sway brace pipe clamp. The C -C length must be equal to or greater than the minimum length in the table below or less than the maximum length in table below.
This unit  allows for preload adjustment.  The adjustment nut can be turned until the desire preload is shown by the indicator.
The thrust nut should also be turned until it is in contact with the spring plate.  Lock nuts should then be tightened against the thrust nut and the adjustment nut.

Ordering:  Specify the figure number (E370), name (vibration control and sway brace with adjustable preload), sway brace size (1 thru 6), desired "C - C" dimension, pipe diameter, material, if other than carbon steel, and finish.

sway brace chart E370

sway brace E350 sway brace assembly E355
sway brace extended E360  adjustable sway brace E365
vibration control sway brace E370 vibration control sway brace E375
pipe clamp E380