 |
 |
Application: These pipe clamps are for use
with Sway Brace Assemblies E355, E360, E370 & E375.
Features: Maximum design temperature is 650
Fahrenheit
Design angle minimum is 5 degree.
Selecting the correct sway strut clamp: Once
the sway brace assembly has been properly sized and
selected, the clamp can be easily specified by
stating the figure number of the clamp allowed by a
dash and the sway brace size (1-6).
Construction: A-36 Carbon steel, special
materials available or request.
Finishes available: Carbon steel - black,
painted, or Hot dip galvanized.
Ordering: Specify Name (Pipe clamp for sway
brace assembly), E380- sway brace size (1-6), pipe
diameter, material, if other than carbon steel, and
finish.
Example: Pipe clamp for sway brace assembly,
E380-4, 12" pipe diameter, HDG. |
|
