office (713) 849-3366
fax (713) 849-3654
toll-free (800) SAY-AAAT

 Angle Bracket Fig. 503


angle bracket APPLICATION:  Angle Brackets are used to attach hanger rod to the side of beams, columns or joists, etc.  Angle Brackets are attached to a support structure by bolting.
:  Angle Brackets are cut from flat bar and bent to a right angle. Holes are punched as shown on the sketch.
FINISHES AVAILABLE: Black, Hot Dip Galvanized, Electro-Plated or Painted.
ORDERING:  Specify figure number, size, name and finish, if other than black.
EXAMPLE:  Fig. 503, Size 2, Angle Bracket, HDG.

angle bracket chart