office (713) 849-3366
fax (713) 849-3654
toll-free (800) SAY-AAAT

Fig. 545 Top Beam Hook

beam hook APPLICATION:  Fig. 545 Top Beam Hooks are recommended for use on the top flange of standard wide flange beams, I-beams, tees and angle trusses.
Top Beam Hooks are not recommended where up-ward movement of the pipe may occur from surge or seismic loading.
CONSTRUCTION:  A Fig. 545 Top Beam Hook consists of a bent flat bar with a hook on one end and an attachment hole for the support rod in the other end of the flat bar.
FINISHES AVAILABLE:  Black, Hot Dip Galvanized or Electro-Plated.
ORDERING:  Specify figure number, type, name and finish, if other than black.
EXAMPLE:  Fig. 545, 4, Top Beam Hook, HDG.

beam chart