office (713) 849-3366
fax (713) 849-3654
toll-free (800) SAY-AAAT

Standard U-Bolt
Fig. 700


u bolt APPLICATION:  Fig. 700 U-Bolts are used to secure piping to structural members. When the piping is below the structural member, the U-Bolt provides vertical support and restricts lateral movement while allowing for axial movement.
When the piping system is above the structural member, the U-Bolt restricts lateral movement and upward movement while allowing axial movement of the piping.
Custom U-Bolts can be ordered to allow the pipe to be clamped down to a structural member tightly.
CONSTRUCTION:  A Fig. 700 U-Bolt is provided with four standard hex nuts and has a longer straight threaded length than the Fig. 703 Light Duty U-Bolt.
The Standard U-Bolt is made of SA-36 carbon steel, however, for special requirements, it can be made of alloy or stainless steel, as needed.
FINISHES AVAILABLE:  Black, Hot Dip Galvanized, Electro-Plated or Painted.
ORDERING:  Specify figure number, nominal pipe diameter, name and finish, if other than black.

u bolt chart


Hardware Main

u bolt u bolt light duty u bolt heavy duty
FIG 700 FIG 703 FIG 706
pipe clamp 2 bolt standard pipe clamp 2 bolt intemidiate pipe clamp 2 bolt heavy
FIG 712 FIG 715 FIG 718
pipe clamp 2 bolt x heavy 3 bolt pipe clamp standard 3 bolt pipe clamp intermidiate
FIG 721 FIG 724 FIG 727
pipe clamp 3 bolt heavy pipe clamp 3 bolt x heavy pipe clamp alloy
FIG 730 FIG 733 FIG 736
pipe clamp alloy intermidiate alloy yoke pipe clamp alloy yoke pipe clamp HD
FIG 739 FIG 748 FIG 751
riser pipe clamp offset pipe clamp extended pipe clamp
FIG 754 FIG 763 FIG 766
riser pipe clamp