office (713) 849-3366
fax (713) 849-3654
toll-free (800) SAY-AAAT

Extension Pipe or Riser Clamp
Fig. 754


APPLICATION: Fig. 754 Extension Pipe or Riser Pipe Clamps are recommended for the support and/or restraint of vertical steel pipes.
A Fig. 754 Extension Pipe or Riser Pipe Clamp is designed to attach to the pipe and to rest on a structural member or floor; it is not de-signed to have hanger rods attached to it to support the pipe.
Note that the maximum recommended service temperature for this pipe clamp is 650°F.
The clamp should be bolted to the pipe just below support lugs or other attachment that can carry a shear load.
Placing the clamp just below adequate support lugs will prevent movement of the clamp along the pipe should the frictional resistance between the clamp and the pipe not be sufficient to support the pipe.
See the table of torque values that are provided as a guide for tightening the bolts on the clamp.

CONSTRUCTION: Fig. 754 Extension Pipe or Riser Pipe Clamps consists of two carbon steel flat bars bent to shape and held together by two carbon steel bolts.
FINISHES AVAILABLE: Black, Hot Dip Galvanized, Electro-Plated or Painted.
ORDERING: Specify figure number, nominal pipe diameter, name and finish, if other than black.
EXAMPLE: Fig. 754, 8”, Extension Pipe or Riser Pipe Clamp, HDG.

riser clamp riser clamp









Hardware Main

u bolt u bolt light duty u bolt heavy duty
FIG 700 FIG 703 FIG 706
pipe clamp 2 bolt standard pipe clamp 2 bolt intemidiate pipe clamp 2 bolt heavy
FIG 712 FIG 715 FIG 718
pipe clamp 2 bolt x heavy 3 bolt pipe clamp standard 3 bolt pipe clamp intermidiate
FIG 721 FIG 724 FIG 727
pipe clamp 3 bolt heavy pipe clamp 3 bolt x heavy pipe clamp alloy
FIG 730 FIG 733 FIG 736
pipe clamp alloy intermidiate alloy yoke pipe clamp alloy yoke pipe clamp HD
FIG 739 FIG 748 FIG 751
riser pipe clamp offset pipe clamp extended pipe clamp
FIG 754 FIG 763 FIG 766
riser pipe clamp