office (713) 849-3366
fax (713) 849-3654
toll-free (800) SAY-AAAT

Machine Threaded Rod

Fig. 403


threaded rod  
threaded rod chart FIG. 403 - Right Hand Threads Both Ends
FIG. 403L - Left Hand Threads Both Ends
FIG. 403RL - Right Hand Threads one end, Left Hand Threads other end.

APPLICATION:  Machine Thread Rod is designed to be used as a hanger rod and is threaded on each end to allow adjustment of overall hanger length when used with end attachments like Fig. 424 Turnbuckles, Fig. 418 Eyenuts, etc.
CONSTRUCTION:  Machine Thread Rod is furnished in diameters from 3/8 inch through 4 inches.  The standard thread lengths for each rod diameter are listed in the table.  Machine Thread Rod can be furnished in any specified length.  Machine Thread Rod shorter than 16 inches will be furnished in All Thread Rod.
FINISHES AVAILABLE:  Black, Hot Dip Galvanized, Electro-Plated or Painted.
:  Specify figure number, rod diameter X rod length, name and finish, if other than black.
EXAMPLE:  Fig. 403RL, 5/8” diameter X 38” long, Machine Thread Rod, HDG.